EPSG:2190 · Portugal
Azores Oriental 1940 / UTM zone 26N to KML & KMZ
Azores Oriental 1940 / UTM zone 26N (EPSG:2190) is a Transverse Mercator (UTM) coordinate system on the Azores Oriental 1940 datum, with coordinates in metres. Its official area of use is: Portugal - eastern Azores onshore - Sao Miguel, Santa Maria, Formigas.
- Converter already set to EPSG:2190
- Latitude and longitude on WGS 84, as Google Earth uses
- Download the point as KML
Loading converter…
Good to know
- Pick the UTM zone by longitude. Points outside the zone's area of use are flagged after conversion.
- Datum: Published 3-parameter shift (typically a few metres).
Convert a whole spreadsheet
- Open the web app or the Windows app, and paste your rows from Excel or open a CSV file.
- Under Coordinate system, search for “2190” and pick Azores Oriental 1940 / UTM zone 26N.
- Check one point you know on the map, then press Save KML or Save KMZ and open it in Google Earth.
Check points for EPSG:2190
Five points inside the area of use of Azores Oriental 1940 / UTM zone 26N, with their latitude and longitude on WGS 84 and their easting and northing in this grid (metres). Enter an easting and northing in the converter above: you should get the latitude and longitude shown, to a few centimetres.
| Point | Latitude | Longitude | Easting | Northing |
|---|---|---|---|---|
| Middle of the area of use | 37.41500° N | 25.32000° W | 648,636.94 | 4,142,201.05 |
| Towards the north-west | 37.74200° N | 25.68000° W | 616,267.47 | 4,177,975.70 |
| Towards the north-east | 37.74200° N | 24.96000° W | 679,709.93 | 4,179,114.68 |
| Towards the south-west | 37.08800° N | 25.68000° W | 617,283.32 | 4,105,414.54 |
| Towards the south-east | 37.08800° N | 24.96000° W | 681,280.42 | 4,106,546.46 |
Common mistakes with Azores Oriental 1940 / UTM zone 26N
- Easting and northing swapped. In Azores Oriental 1940 / UTM zone 26N the middle of the grid is near easting 648,636.94 and northing 4,142,201.05. If your easting column holds numbers like 4,142,201.05, the columns are the wrong way round and every point lands far away: swap them before converting.
- Feet entered as metres. Azores Oriental 1940 / UTM zone 26N is in metres. Coordinates copied from a drawing in feet must be converted first, or every point moves outwards from the grid's origin.
- Forgetting the datum. Azores Oriental 1940 / UTM zone 26N is not on WGS 84: published 3-parameter shift (typically a few metres). Picking a WGS 84 grid with the same projection instead leaves the points off by that amount.
- Points outside the grid's area. Azores Oriental 1940 / UTM zone 26N is meant for Portugal - eastern Azores onshore - Sao Miguel, Santa Maria, Formigas. Points well outside that area convert with growing error; the converter flags them so you can choose the right grid.
- A local site grid. If every point is off by the same distance and direction, the drawing may be on a local site grid. Calibrate on three or more known control points instead.
New to this? Read how to convert easting and northing to latitude and longitude.