EPSG:24893 · Peru

PSAD56 / Peru east zone to KML & KMZ

PSAD56 / Peru east zone (EPSG:24893) is a Transverse Mercator coordinate system on the PSAD56 datum, with coordinates in metres. Its official area of use is: Peru - east of 73°W, onshore.

  • Converter already set to EPSG:24893
  • Latitude and longitude on WGS 84, as Google Earth uses
  • Download the point as KML
Loading converter…

Good to know

  • Datum: Published 3-parameter shift (typically a few metres).

Convert a whole spreadsheet

  1. Open the web app or the Windows app, and paste your rows from Excel or open a CSV file.
  2. Under Coordinate system, search for “24893” and pick PSAD56 / Peru east zone.
  3. Check one point you know on the map, then press Save KML or Save KMZ and open it in Google Earth.

Check points for EPSG:24893

Five points inside the area of use of PSAD56 / Peru east zone, with their latitude and longitude on WGS 84 and their easting and northing in this grid (metres). Enter an easting and northing in the converter above: you should get the latitude and longitude shown, to a few centimetres.

PointLatitudeLongitudeEastingNorthing
Middle of the area of use10.26500° S70.83500° W1,287,530.65955,874.24
Towards the north-west5.39000° S72.13400° W1,143,175.981,494,554.22
Towards the north-east5.39000° S69.53600° W1,431,008.801,494,712.26
Towards the south-west15.14000° S72.13400° W1,148,649.69416,172.32
Towards the south-east15.14000° S69.53600° W1,427,780.89416,598.62

Common mistakes with PSAD56 / Peru east zone

  • Easting and northing swapped. In PSAD56 / Peru east zone the middle of the grid is near easting 1,287,530.65 and northing 955,874.24. If your easting column holds numbers like 955,874.24, the columns are the wrong way round and every point lands far away: swap them before converting.
  • Feet entered as metres. PSAD56 / Peru east zone is in metres. Coordinates copied from a drawing in feet must be converted first, or every point moves outwards from the grid's origin.
  • Forgetting the datum. PSAD56 / Peru east zone is not on WGS 84: published 3-parameter shift (typically a few metres). Picking a WGS 84 grid with the same projection instead leaves the points off by that amount.
  • Points outside the grid's area. PSAD56 / Peru east zone is meant for Peru - east of 73°W, onshore. Points well outside that area convert with growing error; the converter flags them so you can choose the right grid.
  • A local site grid. If every point is off by the same distance and direction, the drawing may be on a local site grid. Calibrate on three or more known control points instead.

New to this? Read how to convert easting and northing to latitude and longitude.