EPSG:3066 · Jordan

ED50 / Jordan TM to KML & KMZ

ED50 / Jordan TM (EPSG:3066) is a Transverse Mercator coordinate system on the ED50 datum, with coordinates in metres. Its official area of use is: Jordan.

  • Converter already set to EPSG:3066
  • Latitude and longitude on WGS 84, as Google Earth uses
  • Download the point as KML
Loading converter…

Good to know

  • Datum: Published 3-parameter shift (typically a few metres).

Convert a whole spreadsheet

  1. Open the web app or the Windows app, and paste your rows from Excel or open a CSV file.
  2. Under Coordinate system, search for “3066” and pick ED50 / Jordan TM.
  3. Check one point you know on the map, then press Save KML or Save KMZ and open it in Google Earth.

Check points for EPSG:3066

Five points inside the area of use of ED50 / Jordan TM, with their latitude and longitude on WGS 84 and their easting and northing in this grid (metres). Enter an easting and northing in the converter above: you should get the latitude and longitude shown, to a few centimetres.

PointLatitudeLongitudeEastingNorthing
Middle of the area of use31.28000° N37.09500° E509,070.46461,498.99
Towards the north-west32.54000° N35.76600° E384,128.39601,855.14
Towards the north-east32.54000° N38.42400° E633,769.71602,077.84
Towards the south-west30.02000° N35.76600° E381,003.84322,475.15
Towards the south-east30.02000° N38.42400° E637,375.66322,687.89

Common mistakes with ED50 / Jordan TM

  • Easting and northing swapped. In ED50 / Jordan TM the middle of the grid is near easting 509,070.46 and northing 461,498.99. If your easting column holds numbers like 461,498.99, the columns are the wrong way round and every point lands far away: swap them before converting.
  • Feet entered as metres. ED50 / Jordan TM is in metres. Coordinates copied from a drawing in feet must be converted first, or every point moves outwards from the grid's origin.
  • Forgetting the datum. ED50 / Jordan TM is not on WGS 84: published 3-parameter shift (typically a few metres). Picking a WGS 84 grid with the same projection instead leaves the points off by that amount.
  • Points outside the grid's area. ED50 / Jordan TM is meant for Jordan. Points well outside that area convert with growing error; the converter flags them so you can choose the right grid.
  • A local site grid. If every point is off by the same distance and direction, the drawing may be on a local site grid. Calibrate on three or more known control points instead.

New to this? Read how to convert easting and northing to latitude and longitude.