EPSG:32715 · World
WGS 84 / UTM zone 15S to KML & KMZ
WGS 84 / UTM zone 15S (EPSG:32715) is a Transverse Mercator (UTM) coordinate system on the WGS 84 datum, with coordinates in metres. Its official area of use is: Between 96°W and 90°W, southern hemisphere between 80°S and equator, onshore and offshore. Ecuador - Galapagos.
- Converter already set to EPSG:32715
- Latitude and longitude on WGS 84, as Google Earth uses
- Download the point as KML
Loading converter…
Good to know
- This is a southern-hemisphere grid: northings start at 10,000,000 m at the equator.
- Pick the UTM zone by longitude. Points outside the zone's area of use are flagged after conversion.
- Datum: Defined on WGS 84 — no shift needed.
Convert a whole spreadsheet
- Open the web app or the Windows app, and paste your rows from Excel or open a CSV file.
- Under Coordinate system, search for “32715” and pick WGS 84 / UTM zone 15S.
- Check one point you know on the map, then press Save KML or Save KMZ and open it in Google Earth.
Check points for EPSG:32715
Five points inside the area of use of WGS 84 / UTM zone 15S, with their latitude and longitude on WGS 84 and their easting and northing in this grid (metres). Enter an easting and northing in the converter above: you should get the latitude and longitude shown, to a few centimetres.
| Point | Latitude | Longitude | Easting | Northing |
|---|---|---|---|---|
| Middle of the area of use | 40.00000° S | 93.00000° W | 500,000.00 | 5,572,242.78 |
| Towards the north-west | 16.00000° S | 94.80000° W | 307,388.12 | 8,230,230.47 |
| Towards the north-east | 16.00000° S | 91.20000° W | 692,611.88 | 8,230,230.47 |
| Towards the south-west | 64.00000° S | 94.80000° W | 411,967.01 | 2,901,742.83 |
| Towards the south-east | 64.00000° S | 91.20000° W | 588,032.99 | 2,901,742.83 |
Common mistakes with WGS 84 / UTM zone 15S
- Easting and northing swapped. In WGS 84 / UTM zone 15S the middle of the grid is near easting 500,000.00 and northing 5,572,242.78. If your easting column holds numbers like 5,572,242.78, the columns are the wrong way round and every point lands far away: swap them before converting.
- Feet entered as metres. WGS 84 / UTM zone 15S is in metres. Coordinates copied from a drawing in feet must be converted first, or every point moves outwards from the grid's origin.
- Looking for a datum shift that isn't there. WGS 84 / UTM zone 15S is defined on WGS 84, the datum Google Earth uses, so no shift is applied. If points are off by tens or hundreds of metres, the data is probably on another grid.
- Points outside the grid's area. WGS 84 / UTM zone 15S is meant for Between 96°W and 90°W, southern hemisphere between 80°S and equator, onshore and offshore. Ecuador - Galapagos. Points well outside that area convert with growing error; the converter flags them so you can choose the right grid.
- A local site grid. If every point is off by the same distance and direction, the drawing may be on a local site grid. Calibrate on three or more known control points instead.
New to this? Read how to convert easting and northing to latitude and longitude.