EPSG:3338 · United States

NAD83 / Alaska Albers to KML & KMZ

NAD83 / Alaska Albers (EPSG:3338) is a aea coordinate system on the NAD83 datum, with coordinates in metres. Its official area of use is: United States (USA) - Alaska.

  • Converter already set to EPSG:3338
  • Latitude and longitude on WGS 84, as Google Earth uses
  • Download the point as KML
Loading converter…

Good to know

  • Datum: Treated as WGS 84, no shift (the datums agree to about a metre or better).

Convert a whole spreadsheet

  1. Open the web app or the Windows app, and paste your rows from Excel or open a CSV file.
  2. Under Coordinate system, search for “3338” and pick NAD83 / Alaska Albers.
  3. Check one point you know on the map, then press Save KML or Save KMZ and open it in Google Earth.

Check points for EPSG:3338

Five points inside the area of use of NAD83 / Alaska Albers, with their latitude and longitude on WGS 84 and their easting and northing in this grid (metres). Enter an easting and northing in the converter above: you should get the latitude and longitude shown, to a few centimetres.

PointLatitudeLongitudeEastingNorthing
Middle of the area of use61.35000° N158.78500° W-254,894.821,272,467.93
Towards the north-west67.38000° N176.06200° W-935,425.102,092,567.87
Towards the north-east67.38000° N141.50800° W536,351.761,986,340.61
Towards the south-west55.32000° N176.06200° W-1,374,392.62820,157.72
Towards the south-east55.32000° N141.50800° W788,045.89664,081.13

Common mistakes with NAD83 / Alaska Albers

  • Easting and northing swapped. In NAD83 / Alaska Albers the middle of the grid is near easting -254,894.82 and northing 1,272,467.93. If your easting column holds numbers like 1,272,467.93, the columns are the wrong way round and every point lands far away: swap them before converting.
  • Feet entered as metres. NAD83 / Alaska Albers is in metres. Coordinates copied from a drawing in feet must be converted first, or every point moves outwards from the grid's origin.
  • Forgetting the datum. NAD83 / Alaska Albers is not on WGS 84: treated as WGS 84, no shift (the datums agree to about a metre or better). Picking a WGS 84 grid with the same projection instead leaves the points off by that amount.
  • Points outside the grid's area. NAD83 / Alaska Albers is meant for United States (USA) - Alaska. Points well outside that area convert with growing error; the converter flags them so you can choose the right grid.
  • A local site grid. If every point is off by the same distance and direction, the drawing may be on a local site grid. Calibrate on three or more known control points instead.

New to this? Read how to convert easting and northing to latitude and longitude.