EPSG:5566 · Ukraine
UCS-2000 / Gauss-Kruger CM 21E to KML & KMZ
UCS-2000 / Gauss-Kruger CM 21E (EPSG:5566) is a Transverse Mercator coordinate system on the UCS-2000 datum, with coordinates in metres. Its official area of use is: Ukraine - west of 24°E.
- Converter already set to EPSG:5566
- Latitude and longitude on WGS 84, as Google Earth uses
- Download the point as KML
Loading converter…
Good to know
- Datum: Published 3-parameter shift (typically a few metres).
Convert a whole spreadsheet
- Open the web app or the Windows app, and paste your rows from Excel or open a CSV file.
- Under Coordinate system, search for “5566” and pick UCS-2000 / Gauss-Kruger CM 21E.
- Check one point you know on the map, then press Save KML or Save KMZ and open it in Google Earth.
Check points for EPSG:5566
Five points inside the area of use of UCS-2000 / Gauss-Kruger CM 21E, with their latitude and longitude on WGS 84 and their easting and northing in this grid (metres). Enter an easting and northing in the converter above: you should get the latitude and longitude shown, to a few centimetres.
| Point | Latitude | Longitude | Easting | Northing |
|---|---|---|---|---|
| Middle of the area of use | 49.80500° N | 23.07500° E | 649,486.58 | 5,521,351.56 |
| Towards the north-west | 50.91800° N | 22.52000° E | 607,008.07 | 5,644,192.27 |
| Towards the north-east | 50.91800° N | 23.63000° E | 685,054.49 | 5,646,387.35 |
| Towards the south-west | 48.69200° N | 22.52000° E | 612,025.87 | 5,396,617.77 |
| Towards the south-east | 48.69200° N | 23.63000° E | 693,739.67 | 5,398,841.77 |
Common mistakes with UCS-2000 / Gauss-Kruger CM 21E
- Easting and northing swapped. In UCS-2000 / Gauss-Kruger CM 21E the middle of the grid is near easting 649,486.58 and northing 5,521,351.56. If your easting column holds numbers like 5,521,351.56, the columns are the wrong way round and every point lands far away: swap them before converting.
- Feet entered as metres. UCS-2000 / Gauss-Kruger CM 21E is in metres. Coordinates copied from a drawing in feet must be converted first, or every point moves outwards from the grid's origin.
- Forgetting the datum. UCS-2000 / Gauss-Kruger CM 21E is not on WGS 84: published 3-parameter shift (typically a few metres). Picking a WGS 84 grid with the same projection instead leaves the points off by that amount.
- Points outside the grid's area. UCS-2000 / Gauss-Kruger CM 21E is meant for Ukraine - west of 24°E. Points well outside that area convert with growing error; the converter flags them so you can choose the right grid.
- A local site grid. If every point is off by the same distance and direction, the drawing may be on a local site grid. Calibrate on three or more known control points instead.
New to this? Read how to convert easting and northing to latitude and longitude.