EPSG:7634 · United States
NAD83(2011) / WISCRS St. Croix (ftUS) to KML & KMZ
NAD83(2011) / WISCRS St. Croix (ftUS) (EPSG:7634) is a Transverse Mercator coordinate system on the NAD83(2011) datum, with coordinates in US survey feet. Its official area of use is: United States (USA) - Wisconsin - St. Croix county.
- Converter already set to EPSG:7634
- Latitude and longitude on WGS 84, as Google Earth uses
- Download the point as KML
Loading converter…
Good to know
- Coordinates are in US survey feet. Enter them in those units, not metres.
- Datum: Treated as WGS 84, no shift (the datums agree to about a metre or better).
Convert a whole spreadsheet
- Open the web app or the Windows app, and paste your rows from Excel or open a CSV file.
- Under Coordinate system, search for “7634” and pick NAD83(2011) / WISCRS St. Croix (ftUS).
- Check one point you know on the map, then press Save KML or Save KMZ and open it in Google Earth.
Check points for EPSG:7634
Five points inside the area of use of NAD83(2011) / WISCRS St. Croix (ftUS), with their latitude and longitude on WGS 84 and their easting and northing in this grid (US survey feet). Enter an easting and northing in the converter above: you should get the latitude and longitude shown, to a few centimetres.
| Point | Latitude | Longitude | Easting | Northing |
|---|---|---|---|---|
| Middle of the area of use | 45.03500° N | 92.47000° W | 585,227.49 | 364,226.51 |
| Towards the north-west | 45.14600° N | 92.67400° W | 532,506.56 | 404,659.89 |
| Towards the north-east | 45.14600° N | 92.26600° W | 637,784.99 | 404,872.65 |
| Towards the south-west | 44.92400° N | 92.67400° W | 532,465.91 | 323,714.03 |
| Towards the south-east | 44.92400° N | 92.26600° W | 638,152.18 | 323,926.78 |
Common mistakes with NAD83(2011) / WISCRS St. Croix (ftUS)
- Easting and northing swapped. In NAD83(2011) / WISCRS St. Croix (ftUS) the middle of the grid is near easting 585,227.49 and northing 364,226.51. If your easting column holds numbers like 364,226.51, the columns are the wrong way round and every point lands far away: swap them before converting.
- Metres entered as feet. NAD83(2011) / WISCRS St. Croix (ftUS) is in US survey feet. Enter the values as they are; converting them to metres first puts every point in the wrong place.
- Forgetting the datum. NAD83(2011) / WISCRS St. Croix (ftUS) is not on WGS 84: treated as WGS 84, no shift (the datums agree to about a metre or better). Picking a WGS 84 grid with the same projection instead leaves the points off by that amount.
- Points outside the grid's area. NAD83(2011) / WISCRS St. Croix (ftUS) is meant for United States (USA) - Wisconsin - St. Croix county. Points well outside that area convert with growing error; the converter flags them so you can choose the right grid.
- A local site grid. If every point is off by the same distance and direction, the drawing may be on a local site grid. Calibrate on three or more known control points instead.
New to this? Read how to convert easting and northing to latitude and longitude.