EPSG:9367 · United Kingdom

TPEN11 Grid to KML & KMZ

TPEN11 Grid (EPSG:9367) is a Transverse Mercator coordinate system on the TPEN11 Grid datum, with coordinates in metres. Its official area of use is: United Kingdom (UK) - on or related to the Trans-Pennine rail route from Liverpool via Manchester to Bradford and Leeds.

  • Converter already set to EPSG:9367
  • Latitude and longitude on WGS 84, as Google Earth uses
  • Download the point as KML
Loading converter…

Good to know

  • Datum: Treated as WGS 84, no shift (the datums agree to about a metre or better).

Convert a whole spreadsheet

  1. Open the web app or the Windows app, and paste your rows from Excel or open a CSV file.
  2. Under Coordinate system, search for “9367” and pick TPEN11 Grid.
  3. Check one point you know on the map, then press Save KML or Save KMZ and open it in Google Earth.

Check points for EPSG:9367

Five points inside the area of use of TPEN11 Grid, with their latitude and longitude on WGS 84 and their easting and northing in this grid (metres). Enter an easting and northing in the converter above: you should get the latitude and longitude shown, to a few centimetres.

PointLatitudeLongitudeEastingNorthing
Middle of the area of use53.61000° N2.24000° W203,914.05419,755.45
Towards the north-west53.78400° N2.78000° W168,317.50439,251.85
Towards the north-east53.78400° N1.70000° W239,505.13439,261.87
Towards the south-west53.43600° N2.78000° W168,029.08400,520.73
Towards the south-east53.43600° N1.70000° W239,804.43400,530.79

Common mistakes with TPEN11 Grid

  • Easting and northing swapped. In TPEN11 Grid the middle of the grid is near easting 203,914.05 and northing 419,755.45. If your easting column holds numbers like 419,755.45, the columns are the wrong way round and every point lands far away: swap them before converting.
  • Feet entered as metres. TPEN11 Grid is in metres. Coordinates copied from a drawing in feet must be converted first, or every point moves outwards from the grid's origin.
  • Forgetting the datum. TPEN11 Grid is not on WGS 84: treated as WGS 84, no shift (the datums agree to about a metre or better). Picking a WGS 84 grid with the same projection instead leaves the points off by that amount.
  • Points outside the grid's area. TPEN11 Grid is meant for United Kingdom (UK) - on or related to the Trans-Pennine rail route from Liverpool via Manchester to Bradford and Leeds. Points well outside that area convert with growing error; the converter flags them so you can choose the right grid.
  • A local site grid. If every point is off by the same distance and direction, the drawing may be on a local site grid. Calibrate on three or more known control points instead.

New to this? Read how to convert easting and northing to latitude and longitude.