EPSG:32637 · Middle East
UTM Zone 37N to KML & KMZ
Convert UTM Zone 37N eastings and northings to latitude and longitude, and save them as a Google Earth KML or KMZ. Try a single point here, or convert a whole spreadsheet in the web app.
- Converter already set to EPSG:32637
- Datum shift to WGS 84 applied automatically
- Whole sheets with photos and boundaries in the web or Windows app
About UTM Zone 37N
UTM zone 37N covers longitudes 36°E to 42°E in the northern hemisphere, with its central meridian at 39°E. On the WGS 84 datum it needs no datum shift, so eastings and northings convert straight to the latitude and longitude Google Earth uses.
Where it's used: Western Saudi Arabia (Jeddah, Makkah, Madinah, Tabuk), Syria, western Iraq, eastern Turkey and Ethiopia.
Convert a whole spreadsheet
- Open the web app or the Windows app, and paste your rows from Excel or open a CSV file.
- Under Coordinate system, search for “32637” and pick WGS 84 / UTM zone 37N.
- Check one point you know on the map, then press Save KML or Save KMZ (with photos) and open it in Google Earth.
Check points for UTM Zone 37N
Five points inside the area of use of UTM Zone 37N, with their latitude and longitude on WGS 84 and their easting and northing in this grid (metres). Enter an easting and northing in the converter above: you should get the latitude and longitude shown, to a few centimetres.
| Point | Latitude | Longitude | Easting | Northing |
|---|---|---|---|---|
| Middle of the area of use | 42.00000° N | 39.00000° E | 500,000.00 | 4,649,776.22 |
| Towards the north-west | 67.20000° N | 37.20000° E | 422,169.82 | 7,454,802.98 |
| Towards the north-east | 67.20000° N | 40.80000° E | 577,830.18 | 7,454,802.98 |
| Towards the south-west | 16.80000° N | 37.20000° E | 308,173.65 | 1,858,301.37 |
| Towards the south-east | 16.80000° N | 40.80000° E | 691,826.35 | 1,858,301.37 |
Common mistakes with UTM Zone 37N
- Easting and northing swapped. In UTM Zone 37N the middle of the grid is near easting 500,000.00 and northing 4,649,776.22. If your easting column holds numbers like 4,649,776.22, the columns are the wrong way round and every point lands far away: swap them before converting.
- Feet entered as metres. UTM Zone 37N is in metres. Coordinates copied from a drawing in feet must be converted first, or every point moves outwards from the grid's origin.
- Looking for a datum shift that isn't there. UTM Zone 37N is defined on WGS 84, the datum Google Earth uses, so no shift is applied. If points are off by tens or hundreds of metres, the data is probably on another grid.
- Points outside the grid's area. UTM Zone 37N is meant for Between 36°E and 42°E, northern hemisphere between equator and 84°N, onshore and offshore. Djibouti. Egypt. Eritrea. Ethiopia. Georgia. Iraq. Jordan. Kenya. Lebanon. Russian Federation. Saudi Arabia. Somalia. Sudan. Syria. Türkiye (Turkey). Ukraine. Points well outside that area convert with growing error; the converter flags them so you can choose the right grid.
- A local site grid. If every point is off by the same distance and direction, the drawing may be on a local site grid. Calibrate on three or more known control points instead.
Before you rely on it
Pick the zone by longitude, not by country: a project near 42°E may belong in the next zone. Points outside the zone are flagged after conversion. Always check one known control point before sending a file out.